Advanced Digital Macro Vickers Hardness Tester HV-30AC
HV-30AC Series is a half automatic and intelligent Vickers hardness testing machine, it adopts the close-loop force sensor to replace the traditional quality weight, this innovative design makes the instrument more accurate.
HV-30AC Series selection of testing force and dwell time is controlled and monitored on the front panel, it is automatic during the process of loading, dwell and unloading.
HV-30AC Series adopts digital microscopes with adjustable LED illuminator, no need the operator to read the detail length of indentation, it only needs the operator to aim the D1, D2 diagonal of indentation and press the length key twice, then the built-in computer can computer the Vickers scale.
HV-30AC Series equipped with a large LCD screen, the operation is more directly and clearly.
HV-30AC Series doesn't need the operator to read the diagonal of indentation and check the Vickers testing table, it improves the testing speed and accuracy of hardness testing obviously.
Vickers Video Measurement
XY Anvil
The advantages of the Vickers hardness test are that extremely accurate readings can be taken, and just one type of indenter is used for all types of metals and surface treatments. Although thoroughly adaptable and very precise for testing the softest and hardest of materials, under varying loads, the Vickers machine is a floor standing unit that is more expensive than the Brinell or Rockwell machines.
Principle of Vickers Test
The Vickers hardness test method consists of indenting the test material with a diamond indenter, in the form of a right pyramid with a square base and an angle of 136 degrees between opposite faces subjected to a load of 1 to 100 kgf. The full load is normally applied for 10 to 15 seconds.
The two diagonals of the indentation left in the surface of the material after removal of the load are measured using a microscope and their average calculated. The area of the sloping surface of the indentation is calculated. The Vickers hardness is the quotient obtained by dividing the kgf load by the square mm area of indentation.
When the mean diagonal of the indentation has been determined the Vickers hardness may be calculatedfrom the formula, but is more convenient to use conversion tables.
The Vickers hardness should be reported like 800 HV/10, which means a Vickers hardness of 800, was obtained using a 10kgf force. Several different loading settings give practically identical hardness numbers on uniform material, which is much better than the arbitrary changing of scale with the other hardness testing methods.
Specifications: |
| Product Name |
Advanced Auto-Turret Digital Vickers Hardness Tester |
| Model |
HV-10AC |
HV-30AC |
HV-50AC |
| Code# |
821-171 |
821-181 |
821-191 |
| Testing Force |
Kgf |
0.3, 0.5, 1, 2, |
0.5, 1, 2, 3, |
1, 2,3, 5, |
| 2.5, 3, 5, 10 |
5, 10, 20, 30 |
10, 20, 30, 50 |
| N |
2.94, 4.9, 9.8, 19.6, |
4.9, 9.8, 19.6, 29.4 |
9.8, 19.6, 29.4, 49.0, |
| 24.5, 29.4, 49.0, 98.0 |
49, 98, 196, 294 |
98.0, 196, 294, 490 |
| Testing Range |
8HV~2900HV |
| Lens& Indenter Switch |
Auto-turret |
| Loading Control |
Automatic (Loading, Dwell, Unloading) |
| Magnification of Microscope |
Observation:10x; Measurement:20x |
| Digital Eyepiece |
Magnification:10x |
| Dwell Time |
Adjustable 0~60s |
| Auto Hardness Conversion |
HRA\HRB\HRC\HV\HK\HBW\etc |
| Hardness Indication |
1HV/ LCD Display |
| Output Data |
RS232/Mini-printer |
| Illumination |
Adjustable LED Illuminator |
| Max. Height of Specimen |
160mm |
| Instrument Throat |
135mm |
| Power Supply |
AC220V/50Hz;110V/60Hz |
| Dimension(LxWxH) |
535 x225 x580mm |
| Packing Dimension |
630 x460 x710mm |
| Gross/Net Weight |
60Kg/50Kg |
| Execution Standard |
ISO 6507,ASTM E92,JIS Z2244,GB/T4340 |
| Standard Delivery: |
| Standard Delivery |
Code# |
Standard Delivery |
Code# |
Standard Delivery |
Code# |
| Vickers Indenter |
821-401 |
40x Objective |
821-341 |
Accessories Box |
821-901 |
| 10x Objective |
821-311 |
Analogue X-Y Anvil |
821-701 |
Anti-dust Cover |
821-911 |
| 20x Objective |
821-321 |
V-shape Anvil |
821-521 |
Level Screw |
821-931 |
| 10x Digital Eyepiece |
821-301 |
Power Cable |
821-801 |
Instrument Manual |
HV-10AC/30AC/50AC |
| Optional Accessories: |
| Optional Accessories |
Code# |
Optional Accessories |
Code# |
Optional Accessories |
Code# |
| 25mm Digital Micrometer Head |
821-719 |
Video Measuring Camera |
821-811 |
USB Camera USB-V1 |
821-471 |
| 15x Digital Eyepiece |
821-351 |
1.5x Vickers CCD Adapter |
821-361 |
Vickers Measuring Software |
821-461 |
| LCD Video Monitor |
821-821 |
V-Shape Anvil |
821-521 |
Unequal Specimen Clamp |
821-741 |
){kind=link}